Filter
Top Products
3
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
ABOUT THIS MANUAL
The IS system provides various manuals to meet various system planning and work processes. Use the manuals necessary for your
system.
Manual confi gurations
The following manuals are provided for a network direct system. Read all the manuals for installing, setting up, and using a network
direct system, or provide the manuals to the persons working with the system.
INSTALLATION MANUAL (A booklet included with the IP master station (IS-IPMV))
Used for installing and connecting IP master stations and IP video door stations. (For an installer or serviceman)
SETTING MANUAL (This manual on the CD-ROM included with the IP master station (IS-IPMV))
This manual describes how to make the system settings and system maintenance. (For an installer or serviceman)
OPERATION MANUAL (An electronic manual on the CD-ROM included with the IP master station (IS-IPMV))
Information for using the system for calling, communicating, paging, monitoring, etc. (For users of the system)
Note the following:
This manual describes how to make the system settings for a network direct system (without an IP control unit) only. For a standard
•
(IP) system (including one or more IP control units), refer to the “SETTING MANUAL” for the standard (IP) system.
Master stations and door stations that can be used in a network direct system are IP units (IS-IPMV, IS-IPDV, IS-IPDVF and IS-
•
SOFT) only.
PC master stations (IS-SOFT) can also be used in a network direct system. For setting a PC master stations (IS-SOFT), refer to
•
the “SETTING MANUAL” for the PC master station (IS-SOFT).
PURPOSE OF THE SYSTEM SETTINGS
Confi gure the system settings based on how your system is planned to be used. System settings must be completed before the
system will operate.
CAUTION:
Make the settings correctly. If the settings are not made correctly, the system will not function as planned.