Filter
Top Products
- 33 -
8-6
Program Mode (GH-NS)
1. Menu 1: Select language
Choose language to be displayed on GH-NS.
2. Menu 2: Change ID code
Enter new ID code starting with "∗", then 4-digit number.
(Example: ∗1234)
3. Menu 3: Set access code
Enter new 4-digit Access Code. (Example: 1234)
• (0000) cannot be registered as an access code.
• Recommend not to use a simple access code such as (1111).
4. Menu 4: Write in resident information
Register room #s and resident names.
Enter room #s using 1 to 6-digit characters.
Enter resident name (up to 16 characters).
5. Menu 5: Set input timeout timer
Operation Timer: If the operation panel is not operated for a
certain period of time, the system returns to standby mode.
Programmable from 15 to 99 seconds.
Program Timer: If, in Residential Programming mode, the
operation panel is not operated for a certain period of time, it
automatically cancels the programming mode. Programmable
from 30 to 99 seconds.
Call Timer: Call from Entrance panel expires in a certain period
of time. Programmable from 30 to 99 seconds.
6. Menu 6: Change greeting
Enter greeting message (up to 160 characters).
7. Menu 7: Transfer link information
With Expanded System, enter unit ID# for transferring
Entrance stations and Security guard stations as below;
• Entrance station: Connected to same common line -
"programmed ID#" as is. (e.g. transferring to #2: Enter "2"), or
Connected to another common line - "programmed ID# plus
8" (e.g. transferring to #1: 1+8=9, Enter "9")
• Security guard station: Connected to same common line -
"programmed ID#" as is. (e.g. transferring to #2: Enter "2"), or
Connected to another common line - "programmed ID# plus
2" (e.g. #1: 1+2=3, Enter "3")
8. Menu 8: Set the greeting scroll speed
0 = slow, 9 = fast