2-11
Getting Started and Using Masks
To start and stop the Mask Test
To start and stop the Mask Test
1 Access the Mask Test Setup dialog box and make sure the mask test is
enabled.
2 At the bottom of the Mask Test Setup dialog box, locate the start and
stop mask test buttons.
• The green triangle starts the mask test.
• The red square stops the mask test.
3
Click the green triangle to start the mask test.
When you start a mask test, Infiniium also starts the acquisition system.
Starts mask
test in the
Mask Test
Setup dialog
box.
Stops mask test in the Mask
Test Setup dialog box.
Starts/stops mask test
from the Mask Test tab.