Filter
Top Products
2-4
Getting Started and Using Masks
To install the Standard Masks
To install the Standard Masks
Use the copy of the Mask Test disk to install standard masks onto the Infiniium
hard drive. The Mask Test disk contains many of the available standard masks
that you may need to use during mask testing.
1
Insert the copy of the Mask Test disk in the floppy drive.
2 From the oscilloscope main menu, select Analyze, then Mask Test.
3 In the Mask Test Setup dialog box, select the Enable Mask Test control.
4 In the Mask Test Setup dialog box, click the Load Mask... button.
The Load Mask dialog box will resemble:
5
Click the Install Masks from A: button.
This selects the disk
where the masks
are installed.
This selects the
directory where the
masks are installed.