ADTRAN 61200376L2-31A IP Phone User Manual


 
TA 850 User Manual © 2001, ADTRAN, Inc.
61200375L1-1
TA 850
T1 RCU VoATM UIG/61200376L2-31A
Page 66 of 72
Voice Turn Up
Step Action
1
From the TA 850 main menu, select the
W
AN
menu. (Here you set up
the ATM network.)
2
Select the
ATM C
ONFIG
menu.
3
Enter the I
DLE
C
ELLS
format for your network.
4
Set
D
ATA
S
CRAMBLING
appropriately for your network.
5
Back all the way out to the top level TA 850 menu, and then select the
VOICE
menu. (From this menu, the appropriate Voice information for
working with the Voice Gateway is entered.)
6
Select C
ONFIG
, and from the C
ONFIG
menu, enter the Gateway type
under
C
ALL CONTROL
and enter the VPI and VCI values for
communicating with that Gateway.
For this application,
CALL CONTROL
should be set to Jetstream and the
VPI and VCI values should be set appropriately for your network.
7
To verify correct setup, use the
S
TATUS
menu (under the V
OICE
menu)
to look at the current status of the voice connection.
Under
S
TATUS
, you can view the G
ATEWAY
S
TATS
and information
about the voice PVC along with information about the POTs ports
available on the Gateway.
The G
ATEWAY
S
TATS
menu should show the Gateway Link is up (if
everything is configured correctly).