61200375L1-1
TA 850
T1 RCU VoATM UIG/61200376L2-31A
Page 31 of 72
© 2001, ADTRAN, Inc. TA 850 User Manual
Configuring WAN Settings – ATM Config
Use the W
AN
menu (Figure 5) to access the ATM C
ONFIG
menu.
Figure 5. WAN Menu
Use the ATM C
ONFIG
menu (Figure 6) to set the parameters listed below the figure.
Figure 6. ATM Config Menu
>Idle Cells
The I
DLE
C
ELLS
format must be configured for either ATM F
ORUM
or ITU. Configuring this setting incorrectly for a
particular circuit will cause poor performance at the ATM layer.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of
the circuit.