Filter
Top Products
Section 5 DLP-17 Total Access 600 Series System Manual
232 © 2004 ADTRAN, Inc. 61200624L1-1B
1. Connect the Total Access 6XX unit to your VT100 system (details found in DLP-1, Connecting a
VT100 Terminal or PC to the CRAFT Port).
2. Log in to the system with maximum rights (details are in DLP-2, Logging in to the System).
3. From the DS0 M
APS
menu, select the A
CTIVE
M
AP
option and press <Enter>.
4. From the DS0 M
APS
> A
CTIVE
M
APS
menu, select the D
UAL
T1 M
AP
option; press <Enter>. Select “Y”
for yes to confirm the Active Map change and press <Enter>. The following screen appears.
Figure 1. Dual T1 Map
Perform the steps below in the order listed.
The second T1 connected to the DSX port may only be used for voice connections
(FXS/FXO).