Filter
Top Products
Section 4 User Interface Guide Total Access 600 Series System Manual
100 © 2004 ADTRAN, Inc. 61200624L1-1B
L2 P
ROTOCOL
(ATM F
IRMWARE
)
Use the L2 P
ROTOCOL
menu to select the L2 P
ROTOCOL
, configure the protocol specific parameters, and
view the status as shown in Figure 7. The following menus are for Total Access 600 Series systems using
ATM firmware. All Total Access 600 Series ATM systems have the same L2 Protocol menus regardless of
network interface type (T1, ADSL, SDSL, SHDSL).
Figure 8. L2 Protocol (SDSL ATM) Menu
For convenience, the following heading notations identify the type of firmware and L2 protocol
configured in the Total Access 600 Series system:
L2 Protocol (ATM – NET – ATM)
Configured Layer 2
protocol. (For
example, ATM or
CuMTN.)
Firmware type. (For
example, TDM or
ATM .)
Interface type.
(For example,
Network
(NET),
Ethernet, V.35,
etc.)