Filter
Top Products
Model CM-16 User Guide 23
DIRECTORY
Finding entries in the Directory
Dialing from the Directory
Changing entries in the Directory
Pressing the ∫ key will return you to the main idle display screen.
1. Press Directory c softkey
2. Use the ç and ∂ keys to scroll up and down one listing at a time OR
use the dial pad keys to identify entries starting with a certain
letter. For example, to find directory entries starting with the letter
“S”. press the 7 key four times. The first entry will appear. If there
are more directory listings using the letter “S”, you must type in the
second letter of the name.
1. Press Directory c softkey
2. Find the entry you wish to call in the Directory
3. Press the å key to dial the number or use the Line softkey, where
available, to use a different line to place the call
1. Press Directory c softkey
2. Find the entry you wish to change in the Directory
3. Press Options softkey
4. Press ∂ key once. Display shows Edit and s=Next
5. Press Select softkey. The current stored telephone number for
the directory entry appears on the display. Use the ∂ key or press
the bottom of the volume bar to erase a number and use the keypad
to correct the telephone number.
6. Press the Save softkey to save the change to the phone number.
The display then prompts you to Enter name. If required, change
the name using the instructions found in the “Adding a name and
number to the Directory” on page 22 section of this guide.
7. Press the Save softkey to save the revised Directory entry. Will dis-
playItem saved.