Filter
Top Products
Model CM-16 User Guide 19
OPTIONS
Ring Tone
The CM-16 offers the choice of four different ring tones.
To change the ring tone, follow the display menu prompts using the two
softkeys as required to change, cancel or select a ring tone. Each of the four
ring tones can be heard prior to selection. The display will always show —
confirmed— to indicate when a selection has been made.
Pressing the Cancel softkey returns you to the options list.
Pressing the ∫ key returns you to the main idle display screen.
Custom Name
This option allows a name or extension number etc. to be added/edited and
displayed in idle mode. In a multi-handset environment, this is an ideal
option to personalize each handset to its user or extension number.
From the Custom name option display, press the Change softkey and then
the Edit softkey. If an existing custom name already appears on the display,
the Delete softkey is also shown and can be used to delete a custom name.
• Use the keypad to type out a new label or use the scroll keys ç and ∂
to move the cursor to the desired display position or to erase text.
(See “Changing entries in the Directory” on page 23 in the “Directory” for
additional details.)
• The ChCase softkey changes the screen text between upper and lower case
• The Save softkey saves changes made
Pressing the ∫ key returns you to the main idle display screen.
NOTE: In editing mode, the Volume Bar can be used in place of the ( ç and ∂ )
keys to control the screen cursor
• Press the Lower end volume bar for Backspace/Erase
• Press the Higher end volume bar to add a Space
Call Timer
The duration of calls can be displayed by using this option. By default, the
Call Timer option is always Off.
To turn the timer on, press the Change softkey and the display will indicate
Timer On and –confirmed- and will quickly return to the previous menu
display.
Pressing the ∫ key will return you to the main idle display screen.
Vibrate
The Vibrate option allows the CM-16 handset to signal an incoming call by
vibrating as well as ringing. By default, this option is always Off.
To enable this feature, press the Change softkey and the display will
indicate Vibrate On and-confirmed- and will quickly return to the previous
menu display.