Filter
Top Products
480i IP Phone User Guide 3
Getting Started
Getting Started
When You First Plug in
Your Phone
The 480i automatically begins the
startup sequence as soon as it is
connected. The phone goes
through this process the first time
you plug in your phone and every
time you restart your phone. The
first screen to display is the Aastra
splash screen.
Updating Your Phone
After displaying the Aastra splash
screen, the 480i checks settings and
checks for new configuration and
firmware updates on the
configuration server. If a new
update is found, the phone
displays the update it is installing
(either "Updating Config" or "New
Firmware"). This may take a few
moments while the configuration
server downloads the latest
updates. Your system or network
administrator manages the
updates for the IP phones on the
configuration server.
Important! Do not unplug or
remove power from the phone
while it is checking and installing
firmware.
Startup Screens
After the phone displays the
Aastra splash screen, or after
downloading an update (if an
update was available), the phone
displays the Idle State screen.
Note: The Idle State screen on your
phone may not look exactly as
the figure above. The softkeys
and configuration shown are an
example of what could be set up
on your phone by your system
administrator.