Filter
Top Products
480i IP Phone User Guide 7
Using the 480i Phone
Using the 480i Phone
Hard keys
There are hard keys on your
phone, such as Hold, Redial, Xfer,
Icom and Conf that are configured
for these call-handling features.
These keys are static and cannot
be reprogrammed or changed.
They are located in two different
areas on the phone.
Note: The intercom feature is currently
not available in this version of
the 480i IP phone.
Multiple Line and Call
Appearances
The 480i has 4 hard line/call
appearance buttons each with a
corresponding status light.
Additional line/call appearances
may also have been set up on your
phone as softkeys. To learn more
about this, please refer to the
Softkeys as Line/Call Appearances
section within this guide.
These line/call appearance buttons
and lights can represent physical
lines or calls for your extension.
By pressing a line/call appearance
button, you connect to the line or
a call it represents. The line/call
appearance light indicates the
status of that line or call. When the
phone is taken off-hook, the phone
will automatically select a line for
you.
When you have more than one
call, you can use the left and right
navigation buttons (
3 and 4) to
scroll left and right to the different
call information. Icons 3 and 4
will appear if there is call
information either left, right or
both
sides of the current information
you are viewing.
The display will show what line
the call information is referring to
(L1, L2, L3, etc.), the Caller ID
information (name and number,
Hold
Redial
Goodbye
Options
1
2
ABC
3
DEF
Xfer
Conf
L1
L2
L3
L4
Icom
Services
Line/Call
Appearance
Behaviour
Line/Call
Appearance
Status
Off Idle line or no
call activity
Light flashes
quickly
Ringing
Light flashes
slowly
Hold
Xfer
Conf
L1
L2
L3
L4
Icom
Services