Aastra Telecom 480I Telephone User Manual


 
12 480i IP Phone User Guide
Making Calls
Making Calls
Depending upon how you have
set the Live DialPad option in
your phone, your phone will either
dial the digits as soon as they
are pressed or collect the digits
on the screen before dialing.
See the section “Customizing
your phone” in the Aastra 480i
Installation Guide for more
information on how to configure
the Live DialPad option.
Note: If you are unable to make calls
within certain area codes, check
with your system administrator
for any toll restrictions placed on
your extension that may restrict
your access to long distance area
codes or dialling prefixes.
You can make a call by either:
Lifting the handset (the phone
will automatically select the next
open line/call appearance) and
then entering the number.
Pressing the d /f button and
then entering the number.
Pressing a line/call appearance
button and then entering the
number.
Or if you are pre-dialling the
number, by entering the
number and then pressing
either the
Dial softkey, the d /f button
or one of the four line/call
appearance hard keys.
Dialing a Number Live
If the Live DialPad option is on,
as soon as you press the first digit
on the dial pad the phone will
automatically select the next
available line, go off-hook and
dial as digits are pressed.
Pre-dialing a Number
You can also make a call by
pre-dialling a number. Pre-dialling
lets you view a number before
you dial. Use the Backspace softkey
to correct any errors.
Using Handsfree Speakerphone
The handsfree feature allows you
to speak to someone without using
the handset or headset. Your
phone must be in either the
speaker or speaker/headset audio
mode. For more information on
how to set this audio option in your
phone,
see the section “Customizing Your
Phone” in the Aastra 480i
Installation Guide.
To dial using handsfree, first
press d and enter a number
at the dial tone.
To answer a call on the
480i phone using handsfree,
press d or the line/call
appearance button.
If in speaker audio mode, press
d to switch between handsfree
and handset.
If in speaker/headset audio
mode, press d to switch
between handsfree and headset.
When the handset is on