Handset not registering
■ Check that the base is plugged into the mains power and switched on.
■ Check that the handset battery is fully charged and fitted correctly.
Forgotten your PIN number
■ Try entering the default PIN = 0000. If you have changed the number and cannot
remember it, contact the BT Zenith Flip Helpline on
0870 605 8047.
No display
■ Check that the handset battery is charged. If necessary, replace the battery.
No connection between handset and base
■ You may be out of range of the base. Move closer.
Handset on the base does not charge
■ Maximum charging power is only possible when no calls are being made.
■ Make sure the handset is placed properly on the base. When charging, the battery
symbol is animated, see
pages 9–10.
Handset does not ring
■ Check that the battery is inserted correctly.
■ Check that the handset ringer has not been switched off, see page 61.
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047
74
Help
