Filter
Top Products
6-42
PERIODIC MAINTENANCE AND MINOR REPAIR
6
EAU03766
Rear wheel
To remove the rear wheel
EW000122
w
8 It is advisable to have a
Yamaha dealer service the
wheel.
8 Securely support the motorcy-
cle so that there is no danger
of it falling over.
1. Remove the engine guard by
removing the bolt.
2
1
1. Engine guard
2. Bolt
7. Push the wheel forward, and
then remove the drive chain from
the rear sprocket.
NOTE:
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
8. Pull the wheel axle out, and then
remove the wheel.
2. Remove the brake pedal free
play adjusting nut, and then dis-
connect the brake rod from the
brake camshaft lever.
3. Loosen the axle nut.
4. Turn the drive chain adjusting
plate on each side of the
swingarm fully in direction a.
5. Lift the rear wheel off the ground
according to the procedure on
page 6-39.
6. Remove the axle nut.
1
4
3
5
2
a
1. Brake pedal free play adjusting nut
2. Brake rod
3. Brake camshaft lever
4. Axle nut
5. Chain adjusting plate
5RK-9-11(US) 4/26/02 7:16 PM Page 82