Filter
Top Products
3-9
INSTRUMENT AND CONTROL FUNCTIONS
3
To install the seat
1. Insert the projection on the front
of the seat into the seat holder
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
3. Install the panels.
NOTE:
Make sure that the seat is properly
secured before riding.
1
2
1. Projection
2. Seat holder
EAU04848
Adjusting the shock
absorber assembly
This shock absorber assembly is
equipped with a spring preload
adjusting nut and a rebound damping
force adjusting dial.
EC000015
cC
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
EAU00261
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, turn the
key to the original position, and then
remove it.
EW000030
w
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.
1
a
1. Helmet holder
a. Unlock.
5RK-9-11(US) 4/26/02 7:16 PM Page 27