Filter
Top Products
3-11
INSTRUMENT AND CONTROL FUNCTIONS
3
Rebound damping force
To increase the rebound damping
force and thereby harden the
rebound damping, turn the adjusting
dial in direction a. To decrease the
rebound damping force and thereby
soften the rebound damping, turn the
adjusting dial in direction b.
1
a
b
1. Rebound damping force adjusting dial
EAU00315
w
This shock absorber contains
highly pressurized nitrogen gas.
For proper handling, read and
understand the following informa-
tion before handling the shock
absorber. The manufacturer can-
not be held responsible for proper-
ty damage or personal injury that
may result from improper han-
dling.
8 Do not tamper with or attempt
to open the gas cylinder.
8 Do not subject the shock
absorber to an open flame or
other high heat sources, other-
wise it may explode due to
excessive gas pressure.
8 Do not deform or damage the
gas cylinder in any way, as
this will result in poor damp-
ing performance.
8 Always have a Yamaha dealer
service the shock absorber.
NOTE:
Although the total number of clicks of
the damping force adjusting mecha-
nism may not exactly match the
above specifications due to small dif-
ferences in production, the actual
number of clicks always represents
the entire adjusting range. To obtain
a precise adjustment, it would be
advisable to check the number of
clicks of the damping force adjusting
mechanism and to modify the specifi-
cations as necessary.
Minimum (soft) 20 clicks in direction b*
Standard 9 clicks in direction b*
Maximum (hard) 1 click in direction b*
* With the adjusting dial fully turned in direction a
5RK-9-11(US) 4/26/02 7:16 PM Page 29