Filter
Top Products
6-12
PERIODIC MAINTENANCE AND MINOR REPAIR
6
ECA00039
cC
When removing the engine oil
drain bolt, the O-ring, compression
spring, and oil strainer will fall out.
Take care not to lose these parts.
Check the O-ring for damage and
replace it if necessary.
5. Clean the engine oil strainer with
solvent.
NOTE:
Skip steps 6–11 if the oil filter ele-
ment is not being cleaned.
4321
1
1. Engine oil drain bolt
2. O-ring
3. Compression spring
4. Oil strainer
8. Remove the oil filter element and
O-rings.
9. Check the O-rings for damage
and replace them if necessary.
10. Clean the oil filter element with
solvent, and then install it.
NOTE:
Check the oil filter element for dam-
age and replace it if necessary.
11. Install the oil filter element cover
by installing the bolts and drain
bolt, then tightening them to the
specified torques.
1
2
1. Oil filter element
2. O-ring (×2)
6. Remove the oil filter element
drain bolt to drain the oil from the
oil filter element.
7. Remove the oil filter element
cover by removing the bolts.
2
1
3
1. Oil filter element drain bolt
2. Oil filter element cover
3. Bolt (×2)
5RK-9-11(US) 4/26/02 7:16 PM Page 52