Filter
Top Products
Operations
RECEIVING A CALL
1. IF THE HANDSET IS OUT OF THE BASE UNIT,
press TALK.
2. IF THE HANDSET IS IN THE BASE UNIT, lift the
handset.
DO NOT press TALK. You will automatically be
connected.
ENDING A CALL
1. Place the handset in the base or press TALK to be
disconnected from the line.
FLASH
Use the FLASH button to activate custom calling services
such as Call Waiting or Three-Way Calling. (*Contact your
local Telephone company for these services.)
TEMPORARY TONE (*)
PULSE (rotary) service users may access touch-tone
features needed to operate answering machines or use
electronic banking, calling cards, etc., by pressing the
TONE (*) button. The phone will automatically return to
pulse dialing after the call ends.
OUT OF RANGE
If you experience static while using the telephone, move
closer to the base or change the channel by pressing the
channel button.
6
40-CHANNEL OPERATION
The W-400 cordless telephone automatically searches
and selects the clearest of 40 channels when it is
being used.
SECURITY CODE
The security code prevents your cordless telephone
conversation from being accessed by a phone on a
different line. Once the handset battery is fully charged,
the handset will automatically select the code from a
total of over 65,000 combinations. The code is changed
every time the handset is placed in the cradle.
If you experience difficulty with placing or receiving
calls, a lost security code may be the cause of the
problem. When this occurs, the handset can no longer
communicate with the base. Reset by placing handset
on base for 5-10 seconds. If that does not work, unplug
the AC adapter from the wall outlet. Disconnect the
handset battery for 5-10 seconds, then reconnect.
Place handset back on base and then reinsert the AC
adapter.
PLACING A CALL
1. Press TALK button.
2. TALK BUTTON on handset will light.
3. When you hear a dial tone, place your call.
4. While on a call, if you experience noise or static:
a.Press CHANNEL on handset until a clear channel is
found; the call will not be interrupted.
Or
b. Move closer to base.
Note:
You must be in usable range to change channels.
Base antenna should be in upright position.