Filter
Top Products
21
HEADSET OPERATION
Your VTech cordless phone is equipped with a 2.5mm Headset Jack for use with an optional
accessory Headset for hands-free operation.
If you choose to use the Headset option, you must obtain an optional accessory Headset,
which is compatible with the VTech cordless phone.
To purchase a Headset, call VTech Customer Service at 1-800-595-9511.
In Canada, call VTECH Electronics at 1-800-267-7377.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the VTech cordless
phone Handset. Connect the plug on the Headset cord to the jack on the cordless Handset.
The plug should fit securely. Do not force the connection.
OPERATION
NOTE: Whenever a compatible Headset is con-
nected to the cordless Handset, the microphone on
the Handset will be muted. This is done to limit the
effect of background noise.
The following operational characteristics also apply
to other headsets which are not sold by VTech;
however, VTech assumes no responsibility for their
performance.
The VTech compatible Headset has a reversible,
monaural design. You can wear you Headset on ei-
ther ear, leaving one ear free for room conversation.
The headband can be adjusted to fit the contour of
you head. Using both hands, slide the headband up
or down so that it rests comfortably on your head,
with the speaker cushion centered against your ear.
For maximum sound quality, the flexible microphone
should be positioned at the corner of your mouth,
about one inch from your face.
BELT CLIP
The VTech cordless phone is also equipped with a
detachable belt clip. Align the pins on the inside edge
of the clip with the notches on the sides of the VTech
cordless phone Handset. The belt clip should snap
securely into place.Do not force the connection.
6
5
4
GHI
JKL
MNO
9
7
8
PQRS
TUV
PROG
CONF
HOLD
INTERCOM
FLASH
REDIAL/PAUSE
WXYZ
0
TONE
OPER
1
2
3
ABC
DEF
OFF
LINE 1 LINE 2
ADVANCED OPERATIONS