Filter
Top Products
16
CALLER ID
This telephone provides two types of Caller ID on both the Handset and Base Unit:
Caller ID:
Displays the name and number of each caller after the phone begins ringing
(requires Caller ID service from your telephone company).
Caller ID on Call Waiting:
Shows the name and number of each caller on Call Waiting after
you hear the Call Waiting tone (requires Caller ID on Call Waiting service).
A
NEW CALL
light will flash on the Base Unit to alert you to new
CID records. Once the new caller ID records have been reviewed
on the Handset, the NEW CALL light will go out.
The phone has a Call Log, which stores the name, number, date, and time of the last
50 calls received. You can review the Call Log to see who called while you were out. You
can speed-dial numbers from the Call Log. And you can store names and numbers from
the Call Log into your directory.
NOTE: Caller ID and Call Waiting Caller ID are subscription services, available through
most local phone service providers. You must subscribe to these services to benefit from
the Caller ID features of this phone. Contact your local phone company for details.
REVIEWING THE CALL LOG
With the Handset OFF:
1. Press or . You will see the number of NEW (not viewed) and OLD (previously
viewed) calls.
2. Continue to press or to review the callers.
Some locations are not equipped to send Caller ID information when a person places a call.
When you receive calls from such locations, your phone will display UNAVAILABLE.
If a caller purposely blocks their phone number from being delivered by Caller ID, your phone
will display PRIVATE.
HINT: If a appears in the upper right corner, it indicates the
party has called more than once.
ERASING CALLS
To erase a call; with the Handset OFF:
• Press or until you see the call you want to erase.
• Press SELECT.
• Press until ERASE is blinking. Press SELECT.
• Press until YES is blinking. Then press SELECT.
To erase your entire Call Log; after you have viewed all calls and the handset is off:
• Press or until you see any call in the log.
• Press SELECT.
• Press until ERASE is blinking. Press SELECT.
• Press until ALL is blinking.
Then press SELECT. The handset displays:
• Press until YES is blinking.Then press SELECT.
ADVANCED OPERATIONS