Filter
Top Products
Your
VT 1980
/
VT 1981
cordless
telephone is equipped with a
2.5mm Headset Jack for use with
an optional accessory Headset for
hands-free operation.
If you choose to use the Headset
option, you must do the following:
The
VT 1980
/
VT 1981
is also
equiped with a detachable belt clip.
Align the pins on the inside edge
of the belt clip with the notches on
the side of the
VT 1980
/
VT1981
Handset. The belt clip should snap
securely into place. Do not force
the connection. See Illustration.
The VTech brand compatible
Headset has a monaural design
which is reversible, so you can
wear your Headset on either the left
or right ear, leaving one ear free for
room conversation.
INSTALLATION
Obtain an optional accessory
Headset, which is compatible with
the
VT l98OIVT 1981.
Once you have a compatible
2.5mm Headset, locate the
Headset Jack on the Handset of
your
VT 1980
/
VT 1981.
Connect
the plug on the Headset to the jack
on the cordless Handset. The plug
should fit securely. Do not force
the connection. See illustration.
OPERATION
Note: whenever a compatible
Headset is connected to the
cordless Handset, the microphone
on the Handset will be
MUTED.
This is done to limit the effect of
background noise.
The following operational
characteristics apply to VTech
Headsets. The same may also
apply to other (non-VTech)
compatible headsets, but VTech
assumes no responsibility for their
performance.
ON
RIGHT
EAR
ON
LEFT EAR
The headband can be adjusted
to fit the contour of your head.
Using both hands, slide the
headband up or down so that it
rests comfortably on your head with
the speaker cushion centered
against your ear.
For maximum sound quality, the
flexible microphone should be
positioned at the corner or your
mouth, about one inch from your
face.