Filter
Top Products
To select a different ringer type do the
following:
1. Press
FLASH
2. Press a key 1
..4
to select a ringer type
A
confirmation ring will be heard for
the new ringer type.
1
.Press
FLASH
2,Press a key
1
..4
MEMORY DIALING (SPEED DIALING)
The
VT
1980
1
VT
1981
can store up to 21 different phone numbers that
you can dial simply by pressing
MEM
and the corresponding location code
(01 -20), or simply by pressing the one-touch
EMGCY
key.
TO PROGRAMMING SPEED DlAL NUMBERS
The Handset must be
OFF.
1. Press
MEM.
The
PHONE
LED
will
blink to indicate that you are in the
programming mode.
2. Using the dial pad, enter the number
you want to store. The number can be
up to 16 digits long.
3.
Press
MEM
once more.
TO PROGRAM SPEED
DlAL NUMBERS
-
Press
MEM
Enter
the
number
you
want
to
store
4.
Press the number of the memory
Press
MEM
again
location you wish to store the number in
Enter the memory location
(01 -20). lf you wish to program
EMGCY
you wish to store-
memory, press
EMGCY.
The phone now exits programming mode and emits two beeps.
SPEED NUMBER DIALING
1.
Press
ONIOFF
to get a dial tone.
2. Press
MEM
and the memory
location number code (01 -20).
For example, to dial the number you
W
assianed to location 18, vou would 2.Press
MEM
presi
ONIOFF, MEM,
I,'&
3.Enter memory location
EMERGENCY SPEED NUMBER DIALING (EMGCY
key)
The
EMGCY
key is a dedicated speed dial key which is designed to be
used for emergency numbers, like
911,
or for another frequently dialed
number. It is important to note that
YOU
MUST PROGRAM THE NUMBER
which will be dialed when you press
EMGCY. VTECH DOES NOT PRE-
PROGRAM THIS NUMBER.
To dial using the
EMGCY
key you can simply press
EMGCY
on the
handset
.
The phone will automatically access dial tone, and dial the number
you have stored in the
EMGCY
location.
You can also dial the
EMGCY
number by pressing
ONIOFF
in
advance,and then press the
EMGCY
key.
TO CHANGE OR REPLACE A SPEED DlAL
NUMBER
To change or replace a stored number in speed dial, simply enter the
new number and store it in the memory location you wish to change.