Filter
Top Products
26
Additional Information
Additional Information
27
Additional Information
Additional Information
FCC, ACTA and IC Regulations
1. Product identier and REN information
The label on the back or bottom of this equipment contains, among other things, an
identier indicating product approval and the Ringer Equivalence Number (REN). This
information must be provided to your local telephone company upon request. For equipment
approved prior to July 23, 2001, the product identier is preceded by the phrase “FCC
Reg No.” and the REN is listed separately. For equipment approved after that date, the
product identier is preceded by “US” and a colon (:), and the REN is encoded in the
product identier without a decimal point as the sixth and seventh characters following
the colon. For example, the product identier US:AAAEQ03T123XYZ would indicate an
REN of 0.3.
The REN is used to determine how many devices you may connect to your telephone
line and still have them ring when you are called. In most, but not all areas, the sum
of all RENs should be ve (5.0) or less. For more information, please contact your local
telephone company.
2. Connection and use with the nationwide telephone network
The plug and jack used to connect this equipment to the premises wiring and the telephone
network must comply with the applicable Part 68 rules and technical requirements adopted
by ACTA. A compliant telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also compliant. An RJ11
jack should normally be used for connecting to a single line and an RJ14 jack for two
lines. See Installation Instructions in this user’s manual. This equipment may not be used
with Coin Telephone Lines or with Party Lines. If you have specially wired alarm dialing
equipment connected to your telephone line, ensure the connection of this equipment
does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualied installer.
3. Repair instructions
If this equipment is malfunctioning, it must be unplugged from the modular jack until the
problem has been corrected. Repairs to this telephone equipment can only be made by
the manufacturer or its authorized agents. For repair procedures, follow the instructions
outlined under the Limited Warranty.
4. Rights of the telephone company
If this equipment is causing harm to the telephone network, the telephone company
may temporarily discontinue your telephone service. The telephone company is required
to notify you before interrupting service. If advance notice is not practical, you will be
notied as soon as possible. You will be given the opportunity to correct the problem and
the telephone company is required to inform you of your right to le a complaint with the
FCC. Your telephone company may make changes in its facilities, equipment, operation,
or procedures that could affect the proper functioning of this product. The telephone
company is required to notify you if such changes are planned.