Filter
Top Products
24
Extension In Use Indication
When another telephone on the same
line is currently in use, the IN USE LED
on the base unit, and the IN USE/BAT
LOW LED on the wireless headset will
flash green.
Programming the Ringer Type
The ringer of the base unit and wireless
headset can be independently
programmed to one of four different
tones or OFF.
All programming functions must be
done using the base unit keypad.
Programming the Base Ringer:
• The phone must be OFF and the
corded handset should be cradled.
• Press the PROGRAM key.
• Press the # key (to enter ringer
program mode).
• Press the 1 key (to program the
base ringer)
• Press the 1,2,3 or 4 key to review
the four available ringers. After
each press, the corresponding
ringer will be played from the base
unit.
ADDITIONAL OPERATION
• Once you have selected the ringer
you prefer, press the PROGRAM
key to confirm.
• You can also control the volume
setting of the base ringer using the
switch on the right side of the base.
The switch has three positioins,
OFF, Low or High. Choose the
volume setting that you prefer.
Programming the Wireless Headset
Ringer:
• The phone must be OFF and the
corded handset should be cradled.
• Press the PROGRAM key.
• Press the # key (to enter ringer
program mode).
• Press the 2 key (to program the
headset ringer)
• Press the 1,2,3 or 4 key to review
the four available ringers. Or press
the 0 key to turn the headset ringer
OFF. After each press, the
corresponding ringer will be played
from the headset.
• Once you have selected the ringer
you prefer, press the PROGRAM
key to confirm.