Filter
Top Products
23
Temporary TONE
If you have PULSE telephone service,
this feature allows you to temporarily
switch to TONE dialing for access to
answering machines, bank by phone,
use of calling cards and other special
services.
First, dial the call normally. Then
activate the Temporary Tone feature
by pressing the * key (on eihter the
base unit or dialcard). You can then
press the numbers or symbols you
need, and your phone will send the
proper signals.
When you end the call, the phone will
automatically go back to PULSE
service.
Volume Adjustment
Base unit handset:
• There is a three position switch
(Low, Med, Hi) on the left side of
the handset. Select the volume
level that you prefer.
Wireless headset:
• During and active call, you can use
the volume up and down keys on
the dialcard or on the right side of
the wireless headset, to adjust the
current volume level.
• On the right side of the wireless
headset, the volume up key has a
small raised bump on it to help you
differentiate it from the volume
down key.
Call Waiting
Call Waiting is a subscription service
available from most local telephone
service providers. Contact your provider
for details.
While you are on a call, you will hear
an alert signal (if you subscribe to this
service), indicating that a second caller
is trying to reach you. You can switch
from the active call to the Call Waiting
call simply by pressing the FLASH key
to flash the line. To return to the original
call, press the FLASH key again.
You can use either the FLASH key on
the dial card, or the FLASH key on the
right side of the wireless headset. Both
keys have the same function.
Message Waiting
Your VT 1511 is capable of detecting
a Visual Message Waiting Indication,
generated by many telephone service
providers. If you subscribe to Voice
mail service from your local Telephone
Company, and Visual Message Waiting
Indication is provided, the MESSAGE
WAITING LED on the base unit will
light to alert you of new, unplayed
Voice mail messages:
Once you play all of your new Voice
mail messages, the MESSAGE
WAITING indication will be
automatically turned off.
ADDITIONAL OPERATION