Filter
Top Products
10
THE BATTERY PACK
Spare Battery Charger
The VT 1511 has a built-in spare
battery charger, which is located in the
base unit.
Note:
In order to benefit from this feature,
you must obtain an optional spare
battery from an authorized dealer,
or by contacting VTech Com-
munications at 1-800-595-9511.
Installation
1. Open the spare battery charger in
the base unit.
2. Place a battery pack in the spare
battery charger. Make sure the
metal contacts on the battery are
aligned with the contacts in the
spare battery charger.
Power Backup Function
When a spare battery pack is installed
in the base unit, the VT 1511 uses this
battery pack to provide operational
backup in case of a power failure. If
you have a fully charged battery pack
in the spare battery charger and there
is a power outage, you will still be able
to place and receive calls on the
headset for up to 5 hours. When power
backup mode is active, the POWER
LED will flash slowly.
Replacing a Drained Headset
Battery
The spare battery pack can also be
used to replace a drained headset
battery pack to ensure uninterrupted
use. Be sure to put the drained battery
pack in the spare battery charger for
recharging.
Please note that the spare battery
compartment charges at a slower rate
than a battery pack charging in the
headset (via the remote charging
stand). It takes 24 hours to fully charge
a battery pack in the spare battery
charger.