Filter
Top Products
14
WALL MOUNTING
The Wall Mounting bracket is
designed to fit on standard Wall
Mounting plates.
1. Choose a spot near an electrical
outlet (120v AC) and a telephone
jack. Your phone requires a
modular telephone jack. The power
cord is six feet long; make sure
there is an electrical outlet within
reach of the base. A wall switch
should not control the outlet. If the
switch is ever turned off, your
phone may not function
(unless
you have a fully charged battery
in the spare battery charger).
2. Position the wall-mounting
bracket on the base. Line up the
tabs on the wall-mounting bracket
with the holes on the bottom of the
base. Snap the wall-mounting
bracket firmly in place.
3. Mount the base on the wall.
Position the base so the mounting
studs will fit into the holes on the
wall-mounting bracket. Slide the
base down on the mounting studs
until it locks into place
4. Connect the telephone line cord.
The telephone line cord has a
snap-in plug at each end. Insert
one end into the jack on the back
of the base, and insert the other
end of the plug into the wall jack.
5. Plug the AC adapter into an
electrical outlet and the DC
connector into the power jack
located on the back of the base
unit.