Filter
Top Products
10
Getting Started
The Wall Mount bracket is designed for use on standard Wall Mount plates only.
1. Line up the tabs on the wall mount adapter with the holes on the bottom
of the base unit. Snap the wall mount bracket firmly in place.
2. Plug the AC adapter into an electrical outlet, and the DC connector to
the jack on the bottom of the Base Unit. If the handset battery pack has
not been charged previously, place the handset in the base unit cradle,
and allow it to charge for 12 hours.
3. Connect the telephone line cord to the jack on the bottom of the base
unit, and the other end to the wall jack.
4. Mount the base unit on the wall. Position the base unit so the mounting
studs will fit into the holes on the wall mount bracket. Slide base unit down
on the mounting studs until it locks into place.
Wall Mounting
91-005358-050-000 v2656.pmd 8/5/2004, 4:51 PM10