VTech t2351 Cordless Telephone User Manual


 
www.vtechphones.com
6
GETTING STARTED
Installation
Wall Mounting
Your phone base unit is designed to mount on a standard telephone wall plate. Wall mounting
is optional.
1. Run the power and telephone cords through the slot, then connect them to the jacks located
on the underside of the base.
2. Plug the AC adapter into an electrical outlet. If the battery has not been previously charged,
place the handset in the base, and allow it to charge for at least 16 hours (or overnight). Connect
the telephone line cord to the wall jack.
3. Mount the base on the wall. Position the base unit so the mounting studs will t into the
holes on the wall mount bracket. Slide the base unit down on the mounting studs until
it locks into place.