Filter
Top Products
Appendix
56
Screen messages
Call log empty
There are no caller ID log entries.
Calling base
The handset is calling the telephone base (for intercom calls).
The handset is transferring an outside call to the telephone base.
Calling HS X
The handset is calling another system handset.
Contact deleted
A directory entry is deleted.
Directory empty
There are no directory entries.
Directory full
The directory is full. You cannot save any new entries unless you delete
some current entries.
Ended
You have just ended a call.
Failed
The handset fails to register to the telephone base.
HS X is calling
Another system handset is calling (for intercom calls).
Incoming call
There is a call coming in.
Intercom
The system device is on an intercom call.
Intercom ended
The intercom call has just ended.
Intercom to
You have started the intercom process, and need to enter the number of
the system deivce you wish to call.
Line in use
A system device or another telephone on the same line is in use.
Low battery
The handset battery needs to be recharged.
Microphone on
The mute function is turned off and the other party can hear you.
Muted
The microphone is off. The other party cannot hear you.
New voicemail
There are new voicemail messages from your telephone
service provider.
No battery
The handset in the telephone base or handset charger has no
battery installed.
No line
There is no telephone line connection.
Not available
Someone else is using the directory, caller ID log, or answering system.
Number repeated
The telephone number you have entered is already in the directory.
Out of range or
no pwr at base
The telephone base has lost power, or the handset is out of range.
Phone
The handset/telephone base is on a call.
Put in charger
The battery is very low. Put the handset in the telephone base for
recharging.