VTech IA5884 Cordless Telephone User Manual


 
www.vtechphones.com
42
Problem Suggestion
The telephone does
not ring when there is
an incoming call.
• Make sure the ringer is on. (See page 9).
• Make sure the telephone line cord and power adapter are plugged in properly (see page 4).
• The cordless handset may be too far from the telephone base. Move it closer to the telephone
base.
• There may be too many extension phones on the telephone line to allow all of them to ring
simultaneously. Try unplugging some of them.
• If the other telephones in your home are having the same problem, the problem is in the wiring
or local service. Contact the local telephone company (charges may apply).
• Other electronic products can cause interference to your cordless telephone. Try installing your
telephone as far away as possible from the following electronic devices: wireless routers, radios,
radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors,
televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.
• Test a working telephone at the telephone jack. If another telephone has the same problem, the
problem is in the telephone jack. Contact your local telephone company (charges may apply).
• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.
• Re-install the battery pack and place the cordless handset in the telephone base.
• Wait for the cordless handset to synchronize with the telephone base. To be safe, allow up to
one minute for this to take place.
Troubleshooting
Additional information