Filter
Top Products
www.vtechphones.com
22
Speed dial
Characters by number of key presses
Dial key Once Twice 3 times 4 times 5 times 6 times
1
1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
*
*
#
& ‘ , - . #
Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits
in each location) in the speed dial memory locations you assign (numbered 1 through 9) in each
handset. These numbers can be dialed with two button presses. You can also store telephone
numbers with names alphabetically in the directory. See Telephone directory for instructions.
Store a speed dial entry
1. Press PROG. Then press or until the screen displays SPEED DIAL.
2. Press SELECT. The screen displays ENTER 1-9.
3. Press the key (1 through 9) to assign the speed dial location this number will be stored. The
screen displays ENTER NAME.
4. Using the chart below, enter up to 15 characters for the name you are storing. An error tone
will sound if you try to enter more than 15 characters. Press then press CHAN/REMOVE to
backspace and make corrections; press to advance or press it twice to add a space.
5. After you enter the name, press SELECT or PROG. The screen displays ENTER NUMBER.
• The entries you store
in speed dial memory
will be marked with
01 through 09 and
also display in the
directory.
• Press OFF at any
time to exit speed dial
mode.
• If the location is not
empty, your new entry
will be stored in place
of the old and the
entry will be moved to
a directory location.