VTech CS6129-31 Cordless Telephone User Manual


 
www.vtechphones.com
53
Appendix
Appendix
Battery
It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:
Operation Operating time
While in handset use (talking*) Up to nine hours
While in speakerphone mode (talking*) Up to two hours
While not in use (standby**) Up to seven and a half days
*Operating times are approximate. Your results may vary.
**Handset is off the telephone base but not in use.
The battery needs charging when:
A new battery is installed in the handset.
The handset beeps.
LOW BATTERY is displayed and the battery icon on the handset screen is ashing.
CAUTION:
To reduce the risk of re or injury, read and follow these instructions:
Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
Do not dispose of the battery(ies) in a re. Check with local waste management codes for special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte
may be toxic if swallowed.
Exercise care in handling batteries in order not to create a short circuit with conductive materials such as rings, bracelets, and keys. The
battery and/or conductor may overheat and cause burns.
Charge the battery(ies) provided with or identied for use with this product only in accordance with the instructions and limitations specied
in this manual.
Observe proper polarity orientation between the battery and metallic contacts.
To prevent re or shock hazard, do not expose this product to water or any type of moisture.