VTech CS6129-31 Cordless Telephone User Manual


 
www.vtechphones.com
47
Basic operation
Answering system
Answering system
If the memory is
full, the system
will answer
after 10 rings
and announce,
“Memory is full.
Enter the remote
access code.”
Window displays: Descriptions:
0 No messages.
1-99 Total number of old message(s) recorded.
0-99 (ashing) Total number of new and old message(s) recorded.
The telephone base may have lost and regained power.
The clock needs to be set.
1-99 & F (alternating) Memory is full with total number of messages recorded.
1-99 (counting)
Elapsed time while recording memo or announcement (up to 90 seconds).
99 (ashing) Recording time exceeds 99 seconds.
1-99 (ashing) Current message number during new message playback.
1-99 Current message number during old message playback.
1-8 Current volume level while adjusting.
10-99 Current remote access code while setting.
02, 04, 06, tS Current number of rings before answering while setting.
-- System is answering a call, or the time and date are being set, or being
accessed remotely.
-- (ashing) System is being programmed or initialized.
HI, LO or OF The telephone base ringer level while in set up mode.
On or OF The message alert tone is turned on or off.
Message window displays