Filter
Top Products
30
Basic Operation
Battery Care and Maintenance
• This battery should remain charged up to seven days with the ringer turned
on and up to no limited with the ringer off. A fully charged battery provides an
average talk time of about 6 hours.
• The Battery Pack needs charging when:
— A new battery is installed in the Handset.
— The phone beeps twice every five seconds.
— The screen displays BATTERY LOW and the low battery icon.
• Place the Handset in the Base or Charger so the CHARGING light turns
on.The Battery Pack is typically fully charged in 10 hours.
• You can keep the battery fully charged by returning the Handset to the Base
or Charger after each use.
• If you repeatedly get a low battery indicator, even after charging overnight, the
battery should be replaced.
CAUTION: To reduce the risk of fire or injury to persons or damage to the
telephone, read and follow these instructions carefully:
Charge the battery provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the User’s Manual.
Replacing the Handset Battery Pack
1. Remove the battery compartment cover on the Handset by pressing on the
indentation and sliding the cover downward.
2. Lift out the old Battery Pack and disconnect.
3. Align the two holes in the new Battery Pack’s plug with the socket pins, and
snap the plug into place. Snap the Battery Pack in the compartment, as
described in the Installation section.
4. Replace the cover by sliding it up into place.
5. The new Battery Pack must be charged before using the phone. Place the
Handset in the Base or Charger and allow it to charge for at least 12 hours
the first charge. The telephone might operate before that, but for best perfor-
mance, let the Battery Pack charge fully.
Batteries
91-005650-040-000t2455.p65 7/21/2004, 3:52 PM30