Filter
Top Products
14
Basic Operation
You can store up to 9 telephone numbers with names (up to 15 characters, 24 digits
each location) you dial frequently into the Speed Dial memory locations you assign (1-
9) in each Handset. These numbers can be dialed with two button presses.
You can also store telephone numbers with names alphabetically in the direc-
tory. See Telephone Directory for instructions.
NOTE: The entries you store in Speed Dial memory will be marked with 01
through 09 and also display in the directory.
NOTE: Press OFF at any time to exit memory dial mode.
Store a Number/Name in Memory:
1. Press PROG. Then press until the screen displays
SPEED DIALSPEED DIAL
SPEED DIALSPEED DIAL
SPEED DIAL.
2. Press SEL. The screen displays
ENTER 1-9ENTER 1-9
ENTER 1-9ENTER 1-9
ENTER 1-9.
3. Press the key (1-9) to assign the memory location where this number will be
stored. If the selected location is empty, the screen displays
ENTER NAMEENTER NAME
ENTER NAMEENTER NAME
ENTER NAME.
NOTE: If the location is not empty, your new entry will be stored in place of the old
and will delete the former entry. Take caution to not save over entries you do not
wish to delete from memory.
4. Using the chart below, enter up to 15 characters for the name you’re storing.
Use
to backspace and make corrections; use to add a space.
Telephone Memory
5. When you finish entering the name, press SEL or PROG. The screen displays
ENTER NUMBERENTER NUMBER
ENTER NUMBERENTER NUMBER
ENTER NUMBER.
6. Enter the telephone number. Use to backspace and make corrections.
Press REDIAL/PAUSE to enter a pause if necessary.
1: 1
2: A B C 2
3: D E F 3
4: G H I 4
5: J K L 5
6: M N O 6
7: P Q R S 7
8: T U V 8
9: W X Y Z 9
0: 0
**
**
*: *
#: & ’ , - . #
Presses
Dial Key 1 2 3 4 5 6
91-005650-040-000t2455.p65 7/21/2004, 3:52 PM14