Filter
Top Products
23
Basic Operation
Audible Indicators
Your t 2455 gives you voice prompts for feature operations and voice confirma-
tions when you press a button or complete an operation.
Setting the Clock
1. Make sure the answering system is ON.
2. Press TIME/SET. The system announces the clock setting, then announces:
“
To Set Day and Time, press TIME/SET
.”
3. Press TIME/SET.
4. Press CHANGE until the system announces the correct day, then press TIME/SET.
5. Press CHANGE until the system announces the correct hour, then press
TIME/SET.
6. Press CHANGE until the system announces the correct minute, then press
TIME/SET.
7. Press CHANGE until the system announces the correct year, then press
TIME/SET. The system announces the current clock setting.
NOTE: You can choose to set the time manually, or you can allow it to be set
automatically with incoming Caller ID information. The time will be set auto-
matically only if you subscribe to Caller ID service provided by your local
telephone company.
NOTE: To advance the minutes or years by increment of 10, press and hold
CHANGE. You can select the year from 2000 to 2040.
About Mailboxes
This answering system has three voice mailboxes. Callers using a touch tone
phone can select the mailbox in which their messages will be recorded by press-
ing 1, 2 or 3. If the caller does not select a specific mailbox, their message will be
recorded in Mailbox 1.
About Announcements
• You can record two different announcements — one for normal answering
and one for when you’ve set the system to play an announcement only.
• Use normal answering when you want the system to record callers’ mes-
sages. Use Announce Only when you want to give information to callers
without accepting messages.
• If you choose not to record an announcement, the system answers with a pre-
recorded announcement.
• The normal answering pre-recorded announcement says: “
Hello. I’m unable
to answer your call right now. Please leave your name, number and a mes-
sage after the tone
.” The Announce Only pre-recorded announcement says:
“
Hello, I’m unable to answer your call right now. Please call again. Thank you
.”
• By setting Announce Only to ON or OFF, you decide which announcement
your callers will hear when the system answers a call (the system comes set
for normal answering, with Announce Only turned OFF). See Set Announce
Only, located in the Feature Summary chart later in this section, to change
your announcement selection.
Answering System Operation
91-005650-040-000t2455.p65 7/21/2004, 3:52 PM23