Filter
Top Products
Administrator Programming
Telephone Programming Mode
Strata CIX DP5000-series Telephone UG 02/08 101
Call Waiting and Camp-on Ring Tone Over Handset/
Headset Option
Call Waiting and Camp-on tones are sent to a busy telephone’s speaker to indicate that
a call is waiting. Call Waiting and Camp-on Tones can be sent, as an option, to the
telephone handset or headset, in addition to the speaker. Follow these steps to turn
handset/headset Call Waiting and Camp-on tone On/Off for a DP5000-series
telephone. The default is Off.
1. Press 3+6+9+Hold (simultaneously).
2. Press
0.
3. Press Feature Button 4 (FB4) to toggle On/Off.
FB4, LED On: Call Waiting tone
FB4, LED Off: No Call Waiting tone
4. Press
Hold to set the option.
5. Go off-hook, then on-hook to exit the program mode.
Initialize or Adjust LCD Contrast
³ To initialize LCD Contrast for the LCD Telephones
1. Press
3+6+9+Hold (simultaneously).
2. Press
Mode soft key.
3. Press
Msg button so that the Msg LED is On.
4. Press
Hold. This sets the LCD lightness/darkness contrast to the default setting.
5. Go off-hook, then on-hook to exit the program mode.
³ To adjust LCD Contrast for the LCD Telephones
³ Press and hold down the
Mic button while you press and release Vol s or Vol t
repeatedly.
Each time you press
Vol s or Vol t, the contrast increases or decreases. There are
a total of 13 different contrast levels available.