How to Install Your microSD
TM
Card
1. Locate the microSD
TM
slot on the
right side of the phone and gently
uncover the slot opening.
(microSD™ slot cover stays
attached to the phone so you don't
lose it).
2. Insert the microSD
TM
card in the
correct direction until it clicks into
the slot. If you insert the card in
the wrong direction, it may
damage your phone or your card.
How to Remove Your
microSD
TM
Card
Gently press and release the exposed
edge of the microSD
TM
card, then
remove it from the slot and replace
the cover.
NOTES
●
Do not attempt to remove the microSD
TM
card while reading or writing to the card.
●
Users wishing to transfer or download music
onto a MicroSD™ card inserted into this
phone (through either MTP Sync or Over the
Air) should format the MicroSD™ card on
this handset before using it through(Menu ->
Settings & Tools -> Memory -> Card
Memory -> Options -> Format). Warning:
Formatting the MicroSD™ card will erase all
contents on the card. In the event the
MicroSD™ card is used on this phone
without first formatting it,the phone will
display a “License acquisition failed” during
OTAdownloading or MTPSync. Song files
downloaded or otherwise purchased from
third party providers and stored on a
MicroSD™ card inserted into this device
may be protected or encrypted by such
provider and cannot be played on this
device.
Battery Charge Level
You can find the battery charge
level at the top right of the
LCD screen. When the charge level
becomes low, the battery sensor
sounds a warning tone, blinks the
battery icon, and displays a
warning message. As the charge
level approaches empty, the phone
automatically switches off without
saving.
Signal Strength
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon: the
more bars, the stronger the signal.
If you’re having problems with
signal quality, move to an open area
or, when inside a building, try
moving near a window.
VX8360 19
NOTE
Memory card is sold
separately.