UTStarcom PPLS-7075 Telephone User Manual


 
Installing the Battery
To install the Li-Ion battery:
To install, insertthe battery into the opening on the back
of the phone and gently press down until the latch snaps
into place.
Removing the Battery
WARNING: Do not handle a damaged or leaking Li-Ion battery as you
can be burned.
To remove your battery:
1. Make sure the power is off so that you don't lose any
stored numbers or messages.
2. Press the battery release latch up and remove the
battery from the phone at a 45-degree angle.
16 Section 2A: Your Phone
-
The Basics