Uniden XS1215 Telephone User Manual


 
Installing the Phone
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery pack into the handset
C. Connect the base unit and charging cradle (XS1215+1 only), and charge the handset
D. Mount the base unit on a wall
E. Choose the dialing mode
When choosing a location for your new phone, here are some important guidelines you should
consider:
The location should be close to both a phone jack and a continuous power outlet (one which is not
connected to a switch).
The base and handset should be kept away from sources of electrical noise such as motors and
fluorescent lighting.
The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For better
reception, place the base as high as possible.
The base should be placed in an open area for optimum range and reception.
A. Choose the best location
Avoid noise sources such as a window
by a street with heavy traffic
Avoid heat sources, such as radiators,
air ducts, and sunlight
Choose a central location
Avoid other cordless telephones
Avoid personal computers
Avoid excessive moisture, extremely
low temperatures, dust, mechanical
vibration, or shock
Avoid microwave ovens
Avoid television sets and
other electronic equipment
!
!
If your home has
specially wired alarm
equipment connected
to the telephone line,
be sure that installing
the system does not
disable your alarm
equipment.
If you have questions
about what will
disable your alarm
equipment, contact
your telephone
company or a
qualified installer.
[6]
INSTALLING THE PHONE