Filter
Top Products
Register Handsets to the Main Base before Using! (XS1215+1 only)
Whichever handset you choose to charge in the main base will automatically register to the main base.
The second handset (charging in the extra charging cradle) MUST also be registered to the main base
before use. Follow the steps below to register the second handset.
1) Be sure both handsets are fully charged.
2) Remove the handset from the charging cradle, and place it in the main base. The
LED light on the main base will begin to flash, indicating that the registration is taking place.
3) Wait for at least 5 seconds, then remove the handset from the main base.
4) Press the key on one handset. If appears on the display, the handset is registered,
press the key. Then, try with the second handset. If each handset displays , a new
security code is set. Otherwise, return to step 1 and try again.
5) Once both handsets are registered, it doesn’t matter which handset is placed in the main base or
the charger.
charge/in use
talk/flash
end
TALK
TALK
!
!
When you
charge the
handsets, Caller
ID summary
screen and the
name of the
handset,
appears. If
appears, you are
charging the
handset No.2.
The charging
cradle can be
used to charge
either handset.
Handset No.1
Handset No.2
[12]
REGISTER HANDSETS
Handset No.1