Filter
Top Products
Basic Setup
There are four basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting),
Name Tag and Insert 0.
CIDCW option can only be set by using Handset 1. If you try to set by using Handset 2, you will not see
these options listed on the LCD screen. (Handset 1 shows in the display while the
phone is charging XS1215+1 only).
AutoTalk, Name Tag and Insert 0 options can be set by using either
Handset 1 or Handset 2 (XS1215+1 only).
AutoTalk allows you to answer the phone simply by removing the handset from the cradle.
You do not have to press any keys.
1) When the phone is in standby mode, press and hold the
key. The following screen appears.
2) Press the key (XS1215) or the key
(XS1215+1) to turn AutoTalk on.
3) Press the key or return the handset to charging cradle
to complete the setting. The handset returns to standby
mode.
Caller ID allows you to see the name and number of the calling party before you answer the phone.
Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you
are on the line.
Handset No.1
Activating AutoTalk
Activating Caller ID on Call Waiting
caller
id/menu
select select/channel
end
[14]
BASIC SETUP
Caller ID on Call
Waiting is currently
unavailable in New
Zealand.
Name Tag :0n
Name Tag :0n