Filter
Top Products
Changing the Digital Security Code
To protect you against misbilled calls which might result from your phone being activated by other
equipment, the cordless phone provides (which electrically locks your phone when each
handset is in the cradle) and digital security which automatically selects one of over
262,000 digital security codes for each handset and the main base.
If the handset battery pack is completely discharged or the battery pack is removed, the digital security
code will be lost. If this happens, a new security code is set automatically the next time the battery pack
is charged. In the rare situation that you suspect another cordless telephone is using the same security
code, you can change
the code.
1) Remove the handset from the cradle. Press and hold the key on the main base.
2) While holding the key, place the handset in the main base, and leave the handset in
the main base for more than three seconds. A new random security code is set.
1) Remove the handset from the cradle. Press and hold the key on the main base.
2) While holding the key, place the handset in the main base, and leave the handset in
the main base for more than three seconds.
3) Remove the handset from the main base. Then place the second handset in the main base and
wait for more than three seconds. No need to hold the key this time.
4) Press the key on one handset. Once you make sure appears on the display, press
the key. Then, try with the second handset. If each handset displays , a new security
codes set. Otherwise, return to step 1 and try again.
AutoSecur
Random Cod
find handset
find handset
find handset
find handset
find handset
talk/flash
end
e
e
For XS1215;
For XS1215+1;
Talk
Talk
[32]
CHANGING THE DIGITAL
SECURITY CODE