Filter
Top Products
12
13
To...
Do this
From the earpiece... From the speaker...
switch between the
speakerphone and
earpiece
Press
spEakEr
.
mute the ringer for
this call only
While the phone is ringing, press
MUTE
.
Change the volume
Speaker and earpiece volume Ringer volume
You can change the speaker volume
of each cordless handset separately.
You can change the volume of the
earpiece on each handset; this does
not affect the handset’s speaker
volume.
Anytime you are listening to a
speaker or earpiece, press
Up
to
increase the volume and
down
to
decrease it.
-
-
-
You can change the ringer
volume of each handset
separately.
When the phone is in
standby, press
Up
to
increase the volume and
down
to decrease it.
If you turn the ringer
volume all the way down,
the ringer turns off.
-
-
-
Call waing
Call Waiting is a service available from your telephone provider that
lets you receive calls while you are on another call. Caller ID on Call
Waiting (CIDCW) service displays Caller ID information for a waiting
call. Contact your telephone provider for more information.
If you get a Call Waiting call, the phone sounds a tone and displays any
CID information received for the waiting call. To switch between the
current call and the waiting call, press
TaLk/fLash
. Remember, each
time you switch, there is a short pause before you’re connected to the
other caller.
Using Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider
that shows the phone number (and sometimes the caller’s name) of
incoming calls. Contact your telephone provider for more information.
Caller ID (CID) list Redial list
The phone saves the information for the
last 30 received calls to the CID list. When
the phone’s in standby, each handset
shows how many calls came in since the
last time you checked the CID list.
New records have an asterisk next to the
received time.
Only one handset can access the CID list
at a time, and you can’t access the CID list
while another handset is on a call.
-
-
-
Each cordless
handset remembers
the last 5 numbers
you dialed on it.
The redial list is
separate for each
handset.
-
-
To… Follow these steps…
open the CID list Press
Cid/righT
.
open the Redial list Press
rEdiaL/paUsE.
scroll through the list
Press
down
to scroll through the list from
newest to oldest. Press
Up
to scroll from
oldest to newest.
dial a number
Highlight the number you want* and
press
TaLk/fLash
.
close the list Press
phonEbook/LEfT
.
* If the number is a toll or long distance call, but there’s no 1 at the
front of the CID record, press
*
to add the 1 before you dial the
number.