Filter
Top Products
40
41
Using Special Features
Using a Voice Mail Service
If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. When there are
messages waiting in your voice mailbox, the new message LED on the handset ashes, and appears in the
handset display.
If you program your access number into your phone, you can simply press /Mute to access your voice mail. Your
voice mail service provider should provide you with the access number, signaling tone, and other specics when you
enroll.
Setting the voice mail signaling tone
If you are having trouble with your message waiting indicator on your phone not illuminating when you have waiting
messages, you will need to contact your service provider and inquire as to which type of message notication
signal — either Frequency Shift Keying (FSK) or Stutter Dial Tone (SDT) — their service uses.
If your voice mail service uses an FSK message signal to alert you of a new voice mail message, you must turn
off the Voice Mail Tone. If your voice mail service uses an SDT message signal to alert you of new voice mail
messages, you can leave the Voice Mail Tone on.
Follow the instructions below to set up your cordless phone settings:
Press Menu/Select. Select the GLOBAL SETUP menu, and then the
VOICE MAIL TONE submenu.
Move the cursor to set the SDT Voice Mail Tone to ON or OFF.
Press Menu/Select. You hear a conrmation tone.
1)
2)
3)
8QKEG/CKN6QPG
1P
1HH
8QKEG/CKN6QPG
1P
1HH
UC538BH(WXI2077) book OM.indb 41 5/7/2008 6:02:39 PM