Filter
Top Products
10
Installing the Phone
11
Testing the Connection
Pick up the handset from the cradle and press /Flash. You should hear a dial tone, and the display should
show TALK.
What if I can’t hear a dial tone?
Check the telephone cord connection on the base.
What if the display doesn’t show TALK?
Make sure the battery pack is fully charged.
Make sure the AC adapter cord is securely connected to
the DC IN 6V jack and a standard power outlet.
Try resetting the handset (see page 49).
Check the battery pack connection in the handset (see
page 44).
Make a quick test call, and then press to hang up.
What if there is a lot of static?
Check the sources of interference described in Choosing the
Best Location (see page 6): is the base near any of those?
What if the call doesn’t go through?
Try changing the dialing mode (see the next section).
Note: Make sure you can get a dial tone on any accessory handsets that were packaged with your phone.
•
•
•
•
UC538BH(WXI2077) book OM.indb 10 5/7/2008 6:02:16 PM