Filter
Top Products
12
13
Installing the Phone
Using Multiple Bases
The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include
the DECT1500 series, the DECT2000 series, the DECT3000 series and the WXI2077 series. Once your handset is
registered to more than one base, you can set the handset to search automatically the available base, or you can
select manually which base the handset should connect to (for example, if you have one base with an answering
machine, you can tell the handset to connect that base to check messages).
Note: To conrm how many bases the handset is registered to, open the SELECT BASE submenu (follow the step
1 of Selecting the base on page 14). Press to close the list and return to standby.
Registering the handset to another base
To register a handset to another base:
Make sure the handset battery is fully charged.
If the other base has an LCD display:
With the phone in standby, press Menu/Select on the base. Move the cursor to select the REGISTER
HANDSET menu, and then press Menu/Select. HANDSET REGISTERING will appear.
If the other base does not have an LCD display:
Disconnect the base AC adapter. Then press and hold nd hs, nd or FIND while you reconnect the adapter.
Keep pressing nd hs, nd or FIND until the charge LED starts to blink.
On the handset, press Menu/Select. Select the REGISTER BASE menu. HANDSET REGISTERING will
appear in the display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to
standby.)
Wait approximately thirty seconds. REGISTRATION COMPLETE will be displayed to indicate the handset has
been registered to the base and a handset ID will be automatically assigned.
If REGISTRATION FAILED appears in the LCD, please try these steps again.
1)
2)
•
•
3)
4)
UC538BH(WXI2077) book OM.indb 13 5/7/2008 6:02:17 PM