Uniden TRU5860 Cordless Telephone User Manual


 
EXPANDING YOUR
PHONE
EXPANDING YOUR PHONE [ 41]
Setting up
Charging
Charge the second handset for 15-20 hours before using.
When you charge the second handset, the display shows the name of the handset, HS2.
Dialing mode
Dialing mode is a universal setting. When the mode is changed on the original handset,
the setting for the second handset is changed as well.
CIDCW
CIDCW setting is a universal setting. When the setting is changed on the original
handset, the CIDCW setting for the second handset is changed as well.
CW Deluxe setting is independent from the original handset. To set the CW Deluxe
setting on the second handset, do the following.
1) When the phone is in the standby mode, press
menu/mute.
2) Press
+ or - to move the pointer to Caller ID Setup, then press select/ch.
3) Press
+ or - to select CW Deluxe, then press select/ch.
4) Press
+ or - to select CW Deluxe On to active CW Deluxe features,
then press
select/ch.
Registration
For the TRU5860-2 handset No.2, you can use it with the TRU5860-2 base without
registering the handset. However, you need to register the TRU5860-2 handset No.2
each time you change the digital security code of the original base. Follow the
instructions under Registering the Second Handset on page 39.
Second Handset Operation